How To Fix Torn Drywall Paper

We've all been there.  You want to repaint a room in your house.  You remove the trim, but maybe you don't score the trim sure enough.  The paint pulls the paper on your drywall right off.



Step 1:  Clean up the paper

Using a utility knife, remove all loose paper from the wall. You can cut more of the paper off, that's no problem, you just want to have clean lines.



Step 2:  Sand it down



Step 3:  Prime it

Using a good primer, you'll want to prime the paper.  Why?  We're going to be filling in this area with joint compound.  If you don't primer it first, the paper will basically suck up the moisture from the joint compound.



Step 4:  Joint Compound

Using your putty knife, slather on a layer of joint compound.  Try to feather out the edges of the compound.



Step 5:  Let it dry, then sand

This joint compound is thin and takes several hours to dry.  Resist the urge to flatten out the high points and just let it dry completely.  Then you'll sand the wall.  Be sure to sand it smooth!



Step 6:  Repeat

My drywall paper tear was pretty bad, so I needed to repeat steps 4 and 5.



Step 7:  Prime Again

After you have sanded the wall smooth, add a final coat of primer.  This seals everything in and makes your wall ready to paint.  If you don't primer the joint compound before painting, "flashing" will occur.  This is when the sheen from the patch shows up differently from the sheen of the paint.



You can read similar articles online at www.echomeinspection.com/our-blog.html